Upstate New York's Only State-of-Art Service
Department
We are your source for excellent service with 5 specialized technicians on our staff.
 
Authorized Lionel Service Station No. 53
& MTH National Authorized Service Center
EFFECTIVE IMMEDIATELY:
BECAUSE OF THE HIGH FLOW OF IN-COMING REPAIRS,
ALL ITEMS BEING SENT BY
CUSTOMERS AND OTHER STORES
MUST FIRST BE CALLED IN, OTHERWISE THE REPAIR WILL NOT BE ACCEPTED.
Common replacement parts:
light bulbs, track pins,
lockons & traction tires are available through the Service Center.
All other train & accessory
PARTS
are
NOT
available over the counter.
We
Provide The Following Services:
Warranty
Repairs:
Refer to Manufacturers
Warranty Instructions.
Most warranty repairs are completed in our Service Department.
An Original Sales Receipt Must Accompany All Warranty Work.
Prewar & Postwar Trains & Accessories:
$50.00 / hour + parts
(Minimum 2 hours required for most
refurbishments)
Locomotives are dismantled completely.
If needed, all locomotive parts are individually cleaned thoroughly using a
state-of-the-art
ultra-sonic cleaner and free of all oil, grease and dirt.
Worn or broken parts are replaced with OEM parts or exact reproduction parts.
Please allow 1—6 months for complete refurbishments.
1970-Current Production Trains & Accessories:
Labor is $50.00/ hour + parts
Please allow 1—6 months for labor-intensive repairs and occasional part shipping
delays.
All MTH
DCS Systems purchased at JR Junction are upgraded
with latest MTH codes
free
of charge.
All others, will be charged a upgrade fee of $9.95
Our Service Center Is Also An
Authorized MTH Proto-Sound 2.0 Upgrade Center
All accepted upgrade jobs are $350.00 per locomotive
(includes MTH Proto-Sound 2.0 Upgrade kit & labor)
Miscellaneous parts needed that are not included in MTH PS 2.0 Upgrade kit is
charged extra.
Now
operators can enjoy Proto-Sound 2.0 in older M.T.H. locomotives outfitted with
M.T.H.'s original Proto-Sound sound and control system by having Proto-Sound 2.0
installed.
Each kit
consists of a Proto-Sound 2.0 circuit board, a coil wound Proto-Coupler, various
wire harnesses, new speaker, new rechargeable batteries, new mounting brackets,
and headlight and backup light bulbs. The kits are
factory warranted for 90 days
when installed by JR Junction Train & Hobby. Each kit
will require programming of a sound set prior to operation. The sound sets are
downloaded by our technicians at no additional charge.
Virtually
all features found in factory equipped Proto-Sound 2.0 locomotives are included
in the Proto-Sound 2.0 Upgrade Kit. These include conventional and command mode
Proto Speed Control, full Ps2 digital sound effects, DCS command features,
conventional and command mode Proto-Coupler operation, conventional and command
mode synchronized puffing smoke on locomotives equipped with fan driven M.T.H.
smoke units, self recharging battery backup system and operating headlight
control.
M.T.H.
strongly encourages consumers to utilize the Authorized Service Center for
installation of the Proto-Sound 2.0 upgrade kit. As M.T.H. has long cautioned,
upgrading a locomotive to Proto-Sound 2.0 requires significant rewiring of the
locomotive, installation of new mounting brackets, soldering and careful wire
management to prevent pinched wires that could damage the circuit boards.
Here's
what a Proto-Sound 2.0 Upgrade Kit provides
- Proto
Speed Control
- run locomotives at
constant speeds up and down grades, through curves with and without loads.
- Proto-Coupler
Operation
- uncouple your train at any time in conventional or
command mode.
- Synchronized
Puffing Proto Smoke**
- puffing smoke & chuffing steam sounds
timed to driver revolutions.
- Proto-Sound
2.0 Digital Sound & Control Effects
- Full command control
features and CD-like quality.
- Software
Upgradeable Design
- enhance locomotives with new features or
sounds as they are created.
- 90-Day
Limited Warranty - only when installed
by JR Junction's factory trained technicians.
-
| 
